how to make one pro ice hockey stick ?

Ice hockey stick is one professional industry's products. It means the difference between bauer, easton and CCM has their carbon weave likes clothes on stick, 3K, 15K used in easton stick, 12K used in CCM, and 18K used in bauer stick. So if it is only different case how the appearance they look, No, the key is structure inside of stick, and material carbon fiber and resin. 
Our ice hockey stick recommended to you is UD stick. The key of stick shows on durability, that is easy to control puck, getting wide ranger of bend, Puck release quickly, Slapshot getting more durable, and stick balance is very important, we can make standard balance point as like bauer stick. What good quality we says, it depends on the structure inside carbon layer, resin, carbon fiber. The artwork of stick is very serious step by step. 

Our job is making sure stick with 100% high quality, and without defect sticks before shipment. On the other hand, the blade is one part cracked frequently with running puck, other blade, or ice ground. Of course, our job is finding the best core inside blade, and it needs one fuction for shock absorption. The blade becomes lighter weight, and more strong. Luckly, we have tested many core including PMI, aero foam. We found one core is the best for hockey stick. So it is good for your performance on ice. 

We take care after-service  ,and can replace new stick  for 45 days warranty.

How to make a durable carbon disc wheel

Disc wheel is one product mixed T800 carbon fiber and high density 's PMI core.If consideration from marketplace and Technology. Our disc carbon wheel,has advantage as below 3 points.The 1st,affordable price.The 2nd, because of new material used in wheel, the durability has large improved,so our warranty time extends to 2 years.The 3rd. the weight has been made down for 1180g of one tubular wheel. The physical power's design for every layer of carbon  ,the wheel can support you to pass round the corner as fast as possbile.

The core is key for one good wheel, We test many wheels after used different material core.

So , What is PMI ?  PMI  call  PMI Polymethacrylimide ,one high polymers material. their physical advatage can mix with resin of carbon ,and solidify as size of mould,can support the wonderful stress to every angle of wheel.

As per the main carbon disc wheel in the marketplace , it is very expensive .For many cyclist , to have one disc wheel for practice racing,it can improve your ride. And find some interesting in sprinter ,if it is 1's be in the lead ,it will be great sense .

Foucs on wheels we are making for track bike , TT bike, Road bike . As small maker for wheels we like ,it is our hobbies and interests.

What's the difference between carbon UD,3K,12K and 18K ?

3K

12K 

UD

18K

About carbon weave

The unidirectional material can be oriented at any angle in each layer to optimize stiffness, torsional stiffness, and impact strength. The issue is that the material is very strong along the direction of the fiber and very weak between the fibers. If the laminate is damaged, the resin alone is not enough to constrain the damage. This is where woven fabrics come in.

3K  weave carbon fiber features a 3k tow (3000 filliments per fiber)  almost 3K carbon is from T300 , and is a commonly selected fabric style, delivering uniform strength in both horizontal and vertical directions. As normal , it is used in appearance of rim or frame of bicycle. and weight of 3k is not too much different with UD or 12K weave in rim.

12K  weaves offer the signature appearance that is highly desirable for modern composite parts with great conformability and strength. This fabric is frequently used for structural applications, offering improved economics to fabricators when compared to multiple layers of lighter fabrics. 

and features as below

weave provides signature aesthetics and ease of use

• Used to quickly add bulk and strength
• Unmatched strength to weight ratio
• High Modulus for superior rigidity
• Fire resistant material
• Fatigue resistance for durable strength
• 
  

UD  , Call Unidirectional Carbon, almost it is used in structure inside of bicycle frame and rim .so it is main structural material . except the apparance most people think it is boring, the better features UD have all like high modulus,light weight ,better toughness. that is why the most bicycle frame without weave carbon.

18K weave has 18mm*18mm size  , In fact .it is mostly used in another sports name ice hockey that Bauer stick with 18K carbon . 18K fabrics are woven together with fibers running in two directions,over one fiber and under the next , it has 18000 fills one fiber,very high modulus so far . it addes more strength from two directions in same time. but the manufacturer's cost is higher than 3K /12K . Usually, you may find 18k carbon  in track bike disc wheel.

So many track bike wheels , disc wheels

Almost it covers all track bike wheels ,because difficult to find them.

www.lenoonsports.com

Cycling life with passion and challenge ,You can have own custom road bicycle wheels, So easy ,not too much

www.powerelease.com

Many people want to  have own carbon road bike wheelset As normal , they may buy from brand bicycle , and break bank to get them ,over thousands of dollars .

In fact , there are many competitive and affordable rims and wheels ,as long as you have  time to learn how to custom one wheelset,and buy their assessories. Of course, you can find one bike street shop , they can help you to adjust the balance of wheel.

For example ,we can make Price usd455 or less. so, how do I custom my road bike wheels?

1.Two  Rims  (460+/-10g one rim)   USD270   

-------700c 38mm depth ,23mm / 25 mm width,

2.Hub + Freebub Body -Shimano road 11S   USD120

-------NOVATEC A171SB F172SB , Front & rear 24 

3.Spoke   USD50

-------Pillar 1423 

Free spoke nipples  USD15

Finally ,My road carbon wheels like that  (1480g+/-30g  one wheel )

asymmetric carbon rims ,how to make weight distribution?

To open one asymmetric carbon bicycle rims , to get good balance ,in order to make weight distribution .It has one high level and standard when moulding, and roundness <0.3mm.

As maker of rims ,it is easy to finish it successfully.

www.lenoonsports.com

why not choose one carbon bicycle rims for your bike ?

As know ,more people use or buy alloy rims ,maybe it is cheaper and has light weight performane too.

Carbon fiber bike rims , their performance of cycling ,which depends on materials ,carbon fiber,resin and structure.

Every different rims type , the inside of  rim has different structure to get the best stress and tautness,flex and stiffness.finally , it can reach one high level when physics testing.

When you check one carbon rims , what do you need to focus on ?

1.weight : because of artwork of carbon fiber products ,there must be weight tolerance 15g up and down .the lightest rim someone provide ,suggest you are best to choose medium weight selection,lightest weight, it means the rims lose more stress and tautness,and addes more flex .

2.weave top layer carbon :3k layer ,because all 3K layer almost are T300 level carbon fiber,One problem of 3K , the resin wastage rate is very high for more 10% ,as normal , 3%-5%,you can choose 3K , but you need to notice the weight of rim supplier can write,maybe they can add one UD layer inside .

3.Warranty : as normal, the carbon rim has 2 years warranty.

4.Price : we don't offer so high price ,or so low price, the price must be available ,and affordable. 

www.lenoonsports.com

Road bike rims 88mm depdth

Mountain 650B(27.5")-40mm width-30mm depth-asymmetric